Contact us
AUSTRALIA HEAD OFFICE
Unit 1 of No 2 Picken Street
Silverwater, NSW, 2128
1800 462 278
NEW ZEALAND HEAD OFFICE
35 Station Street
Penrose, Auckland, NZ, 1642
0800 462 278
Roadmap
Markets
Cooking
Food Preperation
Warewash
Office & Service
Work, Health & Safety
Spare Parts
Service
Contact
Product comparison
Compare products now


Comparison list
HOBART

MATERIAL REQUIREMENT

Please click the respective link if you are interested in manufacturing, assembling or supplying parts in the following product groups.

Contact form

Stainless-steel panels

  • Material: 1.4301
  • Ground and not ground
  • Sheet thickness 0.5 to 3mm
  • Annual quantity requirements: 2000 tons

Deep-drawn stainless-steel parts

  • Material: 1.4301
  • Ground and not ground
  • Drawing depth up to 600 mm
  • Partly welded: (e.g. roller seam of laser welding)
  • Annual quantity requirements: 100 to 10,000 units per article

Punched, laser-machined, bent, and welded stainless-steel parts

  • Material: 1.4301
  • Edged, bent and welded
  • Annual quantity requirements: 100 to 10,000 units per article

Injection-moulded parts und tools

  • Thermoplastic synthetic materials
  • With or without reinforcement (glass fibres)
  • Welded plastic assemblies
  • Extrusion and blow-moulded parts
  • Annual quantity requirements: 500 to 30,000 units per article

Pumps and motors

  • 0.18 to 4.0 kW
  • 230V- 50Hz + other voltages
  • Annual quantity requirements: 50 to 20,000 units per article

Injection-moulded parts und tools

  • Equipped with various attachment parts and in various versions
  • Annual quantity requirements: 50 to 10,000 units per article

Heaters

  • Various shapes, voltages and power ratings
  • Annual quantity requirements: 10 to 40,000 units per article

Packaging materials

  • Cartons made in corrugated cardboard
  • Special timber pallets made in pine, impregnated
  • Annual quantity requirements: 100 to 10,000 units per article

Racks

  • Made in plastic (plastic injection moulding parts)
  • Made in stainless steel wire, partly Rilsan coated
  • Annual quantity requirements: 100 to 20,000 units per article

OTS and custom screws

  • Material: 1.4301 and 1.4571
  • Annual quantity requirements: 100 to 500,000 units per article

Hoses and hose clips/clamps

  • Hoses made in EPDM, silicone, Viton; partly equipped with stainless steel jackets
  • Wire and band hose clamps made in 1.4301 and galvanized steel
  • Annual quantity requirements: 50 to 5,000 units per article

Various rubber parts

  • Flat seals, O-rings and formed parts made in EPDM, Viton and silicone
  • Annual quantity requirements: 200 to 50,000 units per article

Bent wire parts, springs

  • Expansion, roller and compression springs made in 1.4310
  • Annual quantity requirements: 50 to 20,000 units per article
top