Contact us
AUSTRALIA HEAD OFFICE
Unit 1 of No 2 Picken Street
Silverwater, NSW, 2128
1800 462 278
NEW ZEALAND HEAD OFFICE
35 Station Street
Penrose, Auckland, NZ, 1642
0800 462 278
Roadmap
Office & Service
Contact
Product comparison
Compare products now


Comparison list
HOBART
Utensil Washers - Front Loading

PREMAX UPT

PREMAX UPT

The UPT utensil washer offers double the capacity compared to the PREMAX UP. Thanks to the lateral wash system, which is unique in PREMAX line, the capacity is additionally increased.

DESCRIPTION

DOWNLOAD SPEC SHEET 

DOWNLOAD MANUALS 

  • Front door utensil washer
  • Useable inside dimensions w x d x h: 1110 x 773 x 825mm
  • Nominal capacity up to 30 cycles/h
  • 6 automatic programmes: short, standard, steam washing, detergent direct spraying, continuous, hygiene
  • Double walled housing
  • Strainer soil sensor
  • Refill signal (detergent / rinse aid)
  • Self-cleaning programme
  • Separate tank fill (can be deactivated)
  • Ready to install - completely equipped: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer, tank heating, separate tank fill (can be deactivated), back panel
  • Tank, frame, wash / rinse arms and panels are stainless steel 1.4301
  • Standard with Exhaust Heat Recovery and VAPOSTOP
  • Includes - stainless steel base rack, tray support insert (323637) and plastic 500 x 500mm flat rack

Variants

Order number Description
UPT

Basic model with Exhaust Heat Recovery / VAPOSTOP & racks - 415/50/3NPE - 32 amp

PRODUCT FEATURES

  • Extra capacity by side washsystem: capacity up to 8 GN-trays 1/1 or 5 EN2 container
  • Detergent direct spraying system: system soaks the wash ware following the detergent pre-washing cycle and softens even the most severely encrusted food residues
  • VISIOTRONIC control: single-button control with remaining time indicator together with text and graphic display
  • SENSO-ACTIVE resource management: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result
  • POWER wash: high-pressure washing to wash heavily soiled wash items
  • CLIP-IN wash and rinse arms: wash and rinse arms can be removed with one hand and without any tools
  • USB-interface: comfortable download of operational data in form of a protocol via USB
  • GENIUS-X² fine filter system: advanced filter system with prewash function reduces detergent consumption up to 35 %
  • ROTOR-X wash system: separate rotating upper and lower 4-spoke wash arms deliver dynamic wash power
  • VAPOSTOP (optional): prevents vapour to escape from machine when door is opened
  • The optional exhaust heat recovery uses steam to heat fresh feed water and reduces the amount of power needed, saving up to 7.8 kW
  • Loading height: above-average loading height of 860 mm
  • Intelligent energy management: the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced
  • VAPO-ACTIVE steam washing: significantly less manual pre-cleaning and second runs by intensive wash cycles with steam injection
  • Interlocked strainer: prevents operation without tank strainer
  • EASY-CLEAN concept: blue markings in the machine help the operator to identify the components which require cleaning
  • Hygiene programme: for removal of calcium carbonate and other deposits from wash chamber
  • Watermark approved to WMTS-101:2018, Cert. WMKT21944

Technical data

Cycle Times* 120 / 240 / 280 secs. and special cycles
Water Consumption 14 l/rack
Tank Capacity 130 litres
Tank Heating 6.1 kW
Power Supply 415 / 50 / 3NPE
Booster Loading - Standard 18.1 kW
Booster Loading - Alternative 9.1 kW
Total Loading - Standard 24.5 kW l 3 x 50 A
Total Loading - Alternative 18.5 kW l 3 x 32 A
Wash Pump 2 x 2.9 kW l 2 x 1,150 l/min
Rack Size 1,240 x 700 mm
Loading Height 860 mm
Noise Level 70 dB (A)
Weight (gross / net) 325 / 305 kg

Accessories

Order number Description
323753

Universal insert for for plates, bowls, sheets, trays etc - 568 x 665 mm

323637

Tray support insert for 8 large pans - space between rows 59 mm - 586 x 625 mm

For machine protection the water hardness should not exceed 3°dH, if higher we recommend using a HOBART HYDROLINE water softener / treatment system.

top